Cortelco SIP-T18P Quick Reference

Simply ip phone

Enlarged version

There are three ways to transfer the call: Blind Transfer, Attended Transfer and Semi-Attend Transfer.

A and B is on an conversation, A press TRAN button to put B on hold, then A can dial the third number

C and press TRAN button to call out. Then A will turn to idle status

After C answered it, B can talk to C

A and B is on an conversation, A press TRAN Button to put B on hold, then A can dial the third number

C and press the # button to call out

After C answered it, A and C can have a private conversation without B hearing it, then A hung up or

press the TRAN button to complete the transfer

A will be disconnected from the call. B can talk to C

A and B is on an conversation, A press TRAN button to put B on hold, then A can dial the third number

C and press the # button to call out

While C is ringing, A hang up or press the TRAN button to complete the transfer.

You will be disconnected from the call, when C pick up, B can talk to C

IP Address: Pick up the handset and dial "**90#", follow the voice prompt to get the IP address

Subnet Mask: Pick up the handset and dial "**91#", follow the voice prompt to get the Subnet Mask

Gateway: Pick up the handset and dial "**92#", follow the voice prompt to get the Gateway

DNS1: Pick up the handset and dial "**93#", follow the voice prompt to get the DNS1

DNS2: Pick up the handset and dial "**94#", follow the voice prompt to get the DNS2

Note:

The functions such as DSS key, Call Forward, DND, Call Waiting, etc. should be set via web page.

For the details, please refer to the user manual.

V0.2

Simply IP Phone

SIP-T18P

Table of Contents

Need help?

Do you have a question about the SIP-T18P and is the answer not in the manual?

Page 1 After C answered it, B can talk to C Simply IP Phone SIP-T18P A and B is on an conversation, A press TRAN Button to put B on hold, then A can dial the third number C and press the # button to call out...
Page 2 Pick up the handset to make a call. Dial the number directly, and press the # key to call out Dial the RD button to dial out the last called number directly If you are on another call, press the Hold key to answer it If you are not on another call, just lift the handset to answer it You can also press the MUTE button to deny the incoming call Press the MUTE button during a conversation to mute the call, and press it again to get the...