Recommended Installation Locations - Kidde KN-COB-IC Manual

120 v a.c. carbon monoxide alarm with interconnect
Hide thumbs Also See for KN-COB-IC:
Table of Contents

Advertisement

Installation
This Kidde CO alarm can be used independently or
interconnected with other Kidde alarms. The alarms should
be mounted in or near bedrooms and living areas. It is
recommended that you install a Kidde CO alarm on each
level of your home.
When choosing your installation locations, make sure you
can hear the alarm from all sleeping areas. If you install
only one carbon monoxide alarm in your home, install the
alarm near bedrooms, not in the basement or furnace
room.

Recommended Installation Locations

CAUTION: This alarm will only indicate the presence of
carbon monoxide at the sensor. Carbon monoxide may be
present in other areas.
WARNING: This product is intended for use in ordinary
indoor locations of family living units. It is not designed to
measure compliance with Occupational Safety and Health
Administration (OSHA), commercial or industrial standards.
This device is designed to protect individuals from acute
effects of carbon monoxide exposure. It will not fully
safeguard individuals with specific medical conditions. If in
doubt, consult a medical practitioner. Individuals with
medical problems may consider using warning devices,
which provide audible and visual signals for carbon
monoxide concentrations under 30 ppm. This alarm has
not been investigated by UL for carbon monoxide
detection below 70 ppm.
IMPORTANT: Improper location can affect the sensitive
electronic components in this alarm. Please see the next
section describing locations to avoid.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P/n 900-0120Nighthawk kn-cob-icNighthawk kn-cob-icb

Table of Contents