Related Manuals for Kidco G10
Summary of Contents for Kidco G10
- Page 1 Gateway Model G1 0 for openings 28” to 34” Optional 6” Extension (Model G6) available for openings 34” to 40” Optional 12” Extension (Model G 1 2) available for openings 40” to 46” Only one extension recommended per gate User Guide...
- Page 2 Do not use if any part of gate is broken or missing. This product will not neccessarily prevent all accidents. Never leave child unattended. Use only spare parts from KidCo. Never allow child to climb or swing on gate. Use only with the locking/latching mechanism securely engaged.
- Page 3 Button Spindle housing Spindle D (already fittec 0 Spindle A Safety foot , Wrench 1 Pressure indicator/Wrench Handle Walk through section 1L - Note: To prevent over extension of spindles, notches have intentionally been cut into the threads approximately 3 1/4" from the pad ends.
- Page 4 Optional 6” or 12” extensions are available for larger openings. Only one extension recommended per gate. If using gate on a stairway, it must be placed either on top stair or on lowest stair at bottom. Push spindles A, B, C into three corners of gate.
- Page 5 Close walk-through so safety foot is above bottom rail but do not lower handle. Pull out spindle C until it touches mounting surface. Tighten nut towards the gate frame until safety foot rests on bottom rail. If hinge starts to lift, nut is too tight and should be loosened until hinge is back in position.
- Page 6 This warranty extends only to the original retail purchaser and is only valid when suppli- ed with proof of purchase. KidCo will either repair, or at our option replace, free of charge, any parts necessary to correct defects in material or workmanship during the warranty period. This warranty is complete and exclusive.