Fork Lift Option; Bale Spear - Bush Hog 2347 QT Operator's Manual

5-5 FORK LIFT OPTION

Raise the positioning lock pins at the top of each
fork. Place fork in the middle of the frame over the
notch in the lower edge. Slide forks to desired posi-
tions and lower pins to lock forks in place.
Forks
5-6 BALE SPEAR OPTION
Insert long spear into top of frame and fasten with
eccentric nut as shown. Tapered side of nut must be
against frame. Torque nut to 470 -505 ft./lbs. Insert
short spears into tubes at bottom of frame and tight-
en lock bolts.
5-7 TINE TEETH
Fasten tine teeth to bucket with
fasteners provided as shown.
Tine Tooth
Guard
Mainframe
Lock Pin
Frame Assembly
Long Spear
Short Spears
3/8" U-Bolt
Lockwashers & Nuts
26
1/2 X 1-1/2" Bol
t
Eccentric Nut