Advertisement
Quick Links
Bush hog
Tough
®
2426QT Quick attach Front-Push Loaders
Bush hog Quick attach system
Bush hog
Tough FeaTures
®
Tough Boxed Boom Design
Tough Large Diameter Cross Tubes
Tough robotic Welds
Tough high strength Chrome Plated
Cylinder rods
Tough Powder Coat Paint
MoDeL
Specifications Based on 1997 ASAE STANDARDS
Tractor PTo hP range
2WD/FWa
Maximum Lift height - Measured at Pivot Pin
Maximum Lift height - Under Level Bucket
Maximum Dump angle
Digging Depth
Lift Capacity to Maximum Height - At Pivot Pin
Lift Capacity to Maximum Height - 31.5 inches Forward of Pivot Pin
Lift Capacity to 59 inch Height - At Pivot Pin
Lift Capacity to 59 inch Height - 31.5 inches Forward of Pivot Pin
Breakout Force - At Pivot Pin
Breakout Force - 31.5 inches - Forward of Pivot Pin
rollback Force at Maximum Height - 31.5 inches Forward of Pivot Pin
rollback Force at 59 inch Height - 31.5 inches Forward of Pivot Pin
rollback Force at Ground Level - 31.5 inches Forward of Pivot Pin
raising Time (Ground Level to Full Height)
Lowering Time (Full Height to Ground Level)
Bucket Dumping Time (Full Rollback to Full Dump)
Bucket rollback Time (Full Dump to Full Rollback)
Two 2.0 inch Bore, 23.19 inch Stroke Double Acting Bucket Cylinders and Two 2.25 inch Bore, 29.62 inch Stroke Double Acting Lift Cylinders
hydraulics
specifications Based on Tractor system of
Bush hog Quick attach Buckets
Bush hog Quick attach heavy Duty Buckets
options
Warranty
FeaTures
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
2450 PSI hyd. Pressure & 11 GPM pump capacity
Available in 60, 72 and 80 inch widths
Available in 60, 72 and 84 inch widths
Forklift Attachment (42 inch tines), Round Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
2426QT
35 - 75
2WD only
117 inches
108 inches
50°
4.5 inches
2990 lbs
1920 lbs
4130 lbs
3020 lbs
4985 lbs
3500 lbs
2400 lbs
3340 lbs
2710 lbs
6 seconds
3 seconds
3.5 seconds
2 seconds
1 year limited warranty
Available in major tractor colors
Page 75
Advertisement
Need help?
Do you have a question about the Front-Push Loaders 2426QT and is the answer not in the manual?
Questions and answers
Will the 2426QT Loader fit a 4600 Ford and if so, what bracket package would I need?
The Bush Hog 2426QT Loader is designed for tractors with a PTO horsepower range of 35–75 and is compatible with 2WD only. The Ford 4600 typically falls within this range and is a 2WD tractor, so the loader should fit.
However, the specific bracket package required for mounting the loader to a Ford 4600 is not provided in the given information.
Answer: The Bush Hog 2426QT Loader should fit a Ford 4600, but the required bracket package is not specified.
This answer is automatically generated