Figure 2-6
2-3 DISMOUNTING LOADER
Dismount loader on firm, level ground to facilitate
the next mounting. It is recommended that loader be
stored in a dry place to prevent rusting.
A. Observe the position of boom cylinder mount-
Figure 2-7
Parking Stands Installed
Cylinder Mounting Bushing
11
ing bushing in relation to the subframe. (Figure 2-6)
Remember this position to aid in aligning cross tube
with front bracket when loader is being mounted to
tractor.
B. Remove parking stands from storage. Raise
boom and install as shown in Figure 2-7.
WARNING
DO NOT STAND UNDER LOADER WHILE
REMOVING/INSTALLING PARKING STANDS.
Stands Pinned Into Place