Set The Time And Date - Vip-Vision NVR32PRO(PACK) Quick Installation Manual

Set the Time and Date

When using your NVR for the first time, you will have to set the SYSTEM TIME.

Right clicking anywhere on the screen will bring up the password menu.
Use the mouse to enter the NVR admin password with the on-screen keypad.

Then Right click to open the menu and select "MAIN MENU".

Select "SETTING"

Select "GENERAL"

Set System Time, Date Format and DST (Daylight Saving Time) for your region.

Click Save before clicking OK
Important:
If you change the date or time on your NVR after the recording function is activated, the recorded data may be
deleted. After setting the date and time, it's recommended to clear all HDD data, and start recording again.
7