Alarm Clock - Gigaset C430 Quick User Manual

Alarm clock

Alarm clock
Prerequisite: Date and time are set .
ì
You can activate/deactivate and set the alarm clock as follows:
v ¤ ¤ ¤ Activation: r On/Off
OK
¤
Changing the settings:
- Time: Set the hour and minute for the wake-up time.
Occurrence: r Daily/Monday-Friday
-
Volume: r Volume can be set at 5 levels or crescendo (increasing volume).
-
Melody: r Select a ringtone for the alarm call.
-
¤
Press the display key Save.
When the alarm clock is activated, the icon ¼and the alarm time is displayed in idle status.
An alarm call is signalled in the display and with the selected ringtone for a maximum of
60 seconds. During a call, the wake-up call is only signalled by a short tone.
Deactivating the alarm call/repeating after a pause (snooze mode)
Prerequisite: One alarm call sounds.
¤
Deactivating until the next alarm call: Press OFF.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
For further details, please refer to the user guide online at www.gigaset.com or on the CD
supplied (depending on what is supplied).
22 da en fi no sv