TCL MT01+DE200 Service Manual page 35

Chassis: MT01+DE200
7. Check the SPDIF output. Connect SPDIF to Digital Power Amplifier.
Note: 4Mhz clock signal is sent out from tuner(TD1316A-MK3), then distributed the
clock to tda10046aht and pnx8314.
2、Final alignment
Fix mainboard on the test tool，power on ，check and make sure all the port are good
Source
Tuner
SCART1/2/SAV-CVBS
SCART1/SAV-YC
SCART1/-RGB
SCART1 CVBS out
HDMI
VGA
headphone
Loud speaker
YUV(YPbPr)
3、The way to Factory menu
Enter the factory menu (can use the IR and press the remote key "vol-"to
"0', press mute remote key ,then press 9,7,3,5 remote key. Press right key to
enter the sub-menu and press MENU key to return the main-menu
4、Balance Adjust
TCL Multimedia Technology Holdings LTD.
Test signal
Cable
PM5418
PM5418
PM5418
cable
DVD with HDMI
certification
Chorma 2326 or 2327
Cable
Cable
chroma2327/BSG-360A/
DVD
Reversion: V0
Test pattern
Full band
PAL, half color &
Gray bar
PAL, half color &
Gray bar
PAL, half color &
Gray bar
First channel
Movie,720p @60Hz
1024x768@60Hz
haft color & Gray
First channel
First channel
1080i@60Hz
haft color & Gray
Conclusion
Picture &
sound is ok
Picture &
sound is ok
Picture &
sound is ok
Picture &
sound is ok
Picture &
sound is ok
Picture &
sound is ok
Picture &
sound is ok
sound is ok
Phase is OK
Picture &
sound is ok