Download Print this page

Safety Precautions; Specifications - Denon AVR-4208 Service Manual

Av surround receiver/ amplifier

Advertisement

QQ
3 7 63 1515 0

SAFETY PRECAUTIONS

The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.

SPECIFICATIONS

Audio Section
Power amplifier:
Rated output:
(All properties shown are only for the
power amplifer stage.)
Dynamic power:
Output terminals:
Analog:
Input sensitivity/input impedance:
Frequency response:
S/N:
Distortion:
Rated output/maximum output:
Digital:
D/A output:
Digital input:
Phono equalizer (PHONO input      REC OUT):
Input sensitivity:
RIAA deviation:
TE
Signal-to-noise ratio:
L 13942296513
Rated output/Maximum output:
Distortion factor:
Video Section
Standard video jacks
Input/output level and impedance:
Frequency response:
S-video jacks
Input/output level and impedance:
Frequency response:
Color component video terminal:
Input/output level and impedance:
Frequency response:
Tuner Section
Receiving range:
Usable sensitivity:
50 dB Quieting sensitivity:
Signal to Noise Ratio (IHF-A):
Total Harmonic Distortion (at 1 kHz):
General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
www
Remote Control Unit (RC-8000): AVR Model only
Batteries:
External dimensions:
Mass:
.
Remote Control Unit (RC-899): AVC Model only
Batteries:
External dimensions:
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.
http://www.xiaoyu163.com
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Stereo (2 ch driven)
125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W × 2 ch (8 Ω/ohms)
270 W × 2 ch (4 Ω/ohms)
350 W × 2 ch (2 Ω/ohms)
6 ~ 16 Ω/ohms
Front/Center:
6 ~ 16 Ω/ohms
Surround:
A or B
8 ~ 16 Ω/ohms
A + B
200 mV/47 kΩ/kohms
10 Hz ~ 100 kHz: +0, −3 dB (DIRECT mode)
105 dB (DIRECT mode)
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V/8 V
Rated output  2 V (at 0 dB playback)
Total harmonic distortion  0.005 % (1 kHz, at 0 dB)
S/N ratio  110 dB
Dynamic range  108 dB
Format  Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
Q Q
74 dB (A weighting, with 5 mV input)
3
6 7
1 3
1 5
150 mV/8V
0.03 % (1 kHz, 3 V)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz  +0, −3 dB
Y (brightness) signal  1 Vp-p, 75 Ω/ohms
C (color) signal  0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz  +0, −3 dB
Y (brightness) signal  1 Vp-p, 75 Ω/ohms
(blue) signal  0.7 Vp-p, 75 Ω/ohms
P
/C
B
B
(red) signal  0.7 Vp-p, 75 Ω/ohms
P
/C
R
R
DC ~ 50 MHz  +0, −3 dB
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 × 10
87.5 MHz ~ 107.9 MHz
1.0 µV (11.2 dBf)
1.6 µV (15.3 dBf)
MONO
23 µV (38.5 dBf)
STEREO
MONO
77 dB
STEREO
72 dB
MONO
0.15 %
STEREO
0.3 %
AC 120 V, 60 Hz (U.S.A., Canada & Taiwan R.O.C. model)
AC 230 V, 50 Hz (Europe & Asia model)
AC 220 V, 50 Hz (China model)
10.5 A (U.S.A., & Canada model)
434 (W) × 179 (H) × 485 (D) mm (17-3/32" × 7-3/64" × 19-3/32")
20.5 kg (45 lbs 3.1 oz)
LR6/AA Type (four batteries)
co
96 (W) × 38 (H) × 168.5 (D) mm (3-25/32" × 1-1/2" × 6-41/64")
242 g (Approx. 8.5 oz) (not including batteries)
.
R6P/AA Type (three batteries)
61 (W) × 230 (H) × 34 (D) mm (2-13/32" × 9-1/16" × 1-11/32")
150 g (Approx. 5.3 oz) (not including batteries)
AVR-4802/AVC-A11SR
9 4
2 8
0 5
8
2 9
9 4
2 8
-15
W)
[AM]
520 kHz ~ 1710 kHz
18 µV
50 dB
m
9 9
9 9
2

Advertisement

loading

This manual is also suitable for:

Avc-a11sr