Cleveland SGM-R Installation, Operation And Repair Manual page 3

FOR YOUR SAFETY
DO NOT STORE OR USE GASO-
LINE OR OTHER FLAMMABLE
VAPOURS OF LIQUIDS IN THE
VICINITY OF THIS OR ANY
OTHER APPLIANCE.
THE FOLLOWING POINTS ARE TO ENSURE THE SAFE INSTALLATION AND OPERATION OF THIS
EQUIPMENT:
ENSURE ALL GAS AND ELECTRICAL SUPPLIES MARCH RATING PLATE
AND ELECTRICAL STICKERS.
OBSERVE ALL CLEARANCE REQUIREMENTS.
DISCONNECT THE ELECTRICAL POWER SUPPLY TO THE APPLIANCE BEFORE
CLEANING OR SERVICING UNIT.
ONLY QUALIFIED SERVICE TECHNICIANS SHOULD REPAIR THIS UNIT.
THE INSTALLATION AND CONNECTION MUST COMPLY WITH LOCAL CODES, OR IN THE ABSENCE
OF LOCAL CODES, WITH CAN/CGA-B149 INSTALLATION CODE OR WITH THE NATIONAL FUEL GAS
CODE, ANSI Z223.1 - LATEST EDITION.
POST IN A PROMINENT LOCATION, INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER
SMELLS GAS. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL GAS
SUPPLIER.
THE APPLIANCE AND ITS INDIVIDUAL SHUT OFF VALVE MUST BE DISCONNECTED FROM THE
GAS SUPPLY PIPING SYSTEM DURING ANY PRESSURE TESTING OF THAT SYSTEM AT TEST
PRESSURES IN EXCESS OF 1/2 PSIG. (3.45 KPA).
THE APPLIANCE MUST BE ISOLATED FROM THE GAS SUPPLY PIPING SYSTEM BY CLOSING ITS
INDIVIDUAL MANUAL SHUT OFF VALVE DURING ANY PRESSURE TESTING OF THE GAS SUPPLY
PIPING SYSTEM AT TEST PRESSURES EQUAL TO OR LESS THAN 1/2 PSIG. (3.45 KPA).
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
IMPROPER INSTALLATION, AD-
JUSTMENT, ALTERATION, SER-
VICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, IN-
JURY OR DEATH. READ THE IN-
STALLATION, OPERATION AND
MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE IN-
STALLING OR SERVICING THIS
EQUIPMENT.
IMPORTANT
-1 -
WARNING