Advertisement
⑦ . A fire may result if the appliance is not used with care,
therefore:
1) Be careful when using the appliance in places where
there is combustible material.
2) Do not apply to the same place for a long time.
3) Do not use in presence of an explosive atmosphere.
4) Be aware heat may be conducted to combustible
materials that out of sight.
5) Place the appliance on its stand after use and allow
it to cool down before storage.
6) Do not leave the appliance unattended when it is
switched on.
3. Take care of your tools
Do not use the tools for any applications other than soldering
or desoldering.
Do not rap the iron against the work bench or otherwise
subject the iron to severe shocks.
Do not file the soldering tip to remove the oxide, please wipe
the tip on the cleaning sponge.
Use only accessories or attachments which are listed in the
operation manual. Use of other tools and other accessories
can lead to a danger of injury.
Please turn off the power before connecting or disconnecting
the soldering iron.
4. Maintenance
Before further use, safety devices or slightly damaged parts
must be carefully checked for error‐free and intended
operation. Inspect moving parts for error‐free operation and
that they don't bind, or whether any parts are damaged.
Damaged safety devices and parts must be repaired or
replaced by a qualified technician, so long as nothing else is
indicated in the operation manual. Use only accessories or
5
Advertisement
