Pro'sKit SS-257 User Manual

SS-257/SS-259
LCD Smart Soldering Iron Station
Thank you for purchasing the
Soldering Iron Station. Please read this manual before operating the
SS-257/SS-259.
Please store the manual in a safe, easily accessible place for future
reference.

Features

• Large screen with backlight, LCD contrast and brightness are adjustable.
• Designed with functional manual and shuffle knob for easy setting, more
convenient and user friendly.
•Comes with high end quad-wire heating element for heat fast recovery.
• Microprocessor controlled provide best performance and accurate
temperature control.
• Temperature calibration function.
• Auto sleep and wake up function, system lock, tip calibration and low
consumption.
•3 data memories store and recall frequently used temperature values.
•Built-in DC 5V/1A USB port for power supply.
• Complies with CE and ESD standard, conform to RoHS.
• Comes with UL Certified Wires.
• Silicone handpiece cord wire heat-resistant up to 200°C.
• Resettable fuse protection design.

Packing List

Please check the contents of the Soldering station package and confirm
that all the items listed below are included.
Soldering Station..........................1
Iron Stand（with cleaning sponge）.1
Soldering Iron..............................1
Power Cord.................................1
Alligator Clip Grounding Wire...........1
User's Manual..............................1
Specifications
SS-257E SS-257B
Model No.
SS-257EU SS-257H
110-120V~ 220-240V~
Input Voltage
60Hz 50Hz
Control system
Power consumption 75W 75W
Output voltage 24VAC 24VAC
LCD Display 73mmX40mm，240X120 dot. Backlight
Temperature range
Temperature
calibration
Temperature stability
Heating element High end quad-wire heater
B
Plug
E
H
Sleep mode
Temperature of sleep
mode
USB port output
Memory setting
Temperature lock
function
Replacement heater 9SS-257-HT
Replacement soldering
9SS-257-SI
iron
Tip-to-ground
resistance potential
Size (mm)
Weight
Package
SS-257/SS-259 LCD Smart
SS-257C SS-259E SS-259B
SS-259EU SS-259H
240V~ 110-120V~ 220-240V~
50Hz 60Hz 50Hz
Microprocessor-controlled
75W 90W 90W
24VAC 25VAC 25VAC
30~500°C /86~932°F
0~699℃(32~1290℉)，Adjustment
±2℃/±36℉ (no load)
High end Silver alloy heater
B
E
C
H
OFF & 1~360min adjustment
30~400℃/86~752℉
DC 5V/1A
3set
yes
9SS-259-HT
9SS-259-SI
≦2Ω/≦2mV
180 x 150 x 106mm
2.3kg
Color Box

Main menu

LCD Display function description
1. Temperature of sleep mode
3. LCD brightness ratio
5. CH1 temperature memory setting
6. CH2 temperature memory setting
7. CH3 temperature memory setting
8. Current temperature
9. Temperature unit
11. Temperature lock
Function setting menu
Press knob for 3 sec., it will enter the function setting menu.
Temperature setting
Calibration of temp.
Sleep temperature setting
Sleep time setting
Temperature unit
Beep setting
LCD brightness setting
SS-259C
LCD contrast ratio setting
Temperature passcode
240V~
50Hz
90W
25VAC
Setting up & operating the Soldering Station
Start to use
Turn on the soldering station, LCD screen will display main menu after
three seconds, last set temperature will display.
Temperature setting
In the main menu, press lower part of shuffle knob, move cursor to
the "SET" mode (as follow picture)，rotate around the
clockwise direction to increase
decrease temperature.
C
Temperature memory choose
In the main menu, press the center of shuffle knob twice, cursor will move
to the CH1/CH2/CH3(see fig.1) ，press the left or right position of shuffle
knob, choose the temperature needed.
Temperature memory setting
Press 3 seconds of shuffle knob into the function setting menu. Press knob
and move cursor to the "Set. Temp." mode, press knob again to the
temperature setting (see fig 2.), rotate around the
direction to increase temperature,
temperature. Press knob to the next menu, choose the "Save & Exit" save
the temperature and exit the menu.
2.Serting temperature
4. LCD screen contrast ratio
10. Current sleep mode
12. Current beep on or off
temperature，counter clockwise direction to
shuffle knob
counter clockwise direction to decrease
Fig.1
shuffle knob in
in clockwise
Fig.2