Advertisement
Safety Instruction
1. The manufacturer assumes no liability for uses other than
those described in the operating instructions or for
unauthorized alterations.
2. The operating instructions and cautions should be read
carefully and kept in an easily visible location in the vicinity of
the control system. Non‐observance of the cautions will result
in accidents, injury or risks to health.
Caution
1. The power cord only can be inserted in approved power
sockets or adapters.
2. High Temperature
The temperature of the soldering tip will reach as high as around
400℃（752℉） when the power switch is on. Since mishandling
may lead to burns and fire, be sure to comply with the following
precautions:
① . Do not touch metallic parts near the soldering tip/
nozzle.
② . Do not use this system near the flammable items.
③ . Advise other people in the work area that the unit can
reach a very high temperature and should be
considered potentially dangerous.
④ . Turn off the power switch while taking breaks and when
finishing using.
⑤ . Before replacing parts or storing the system, turn off the
power and let it cool down to the room temperature.
⑥ . Warning: this tool must be placed on its stand when not
in use.
4
Advertisement
