Related Manuals for Cybernet M661S
Summary of Contents for Cybernet M661S
- Page 1 Cybernet Manufacturing, Inc. All-In-One 17” TFT-LCD Panel PC (Model No. M661S) Version: 1.2 User’s guide-V1.2 April, 2005 V 1.2...
-
Page 2: Registered Trademark
Notice Copyright The copyright of this user’s guide belongs to Cybernet Manufacturing, Inc.. and is protected by copyright law. Partial or full duplication of this document is prohibited without (electronically, mechanically or otherwise) the permission of Cybernet Manufacturing, Inc.. The contents may be modified without notice for the improvement of design, function, and reliability. -
Page 3: Caution
Caution For safe and proper installation and use of this product, please read this guide carefully. Even though this product is equipped with a safety device to prevent and avoid users from getting injured, please follow the instruction carefully. Caution during installation Install on an even and stable place to prevent product damage and injury. - Page 4 and do not directly spray the product. When this product will be idle for an extended period of time, unplug the power cord to prevent damage stemming from power surges. When unplugging the power cord, pull by the plug, not the wire. Do not place this product in a place where the temperature is over 60 C (140...
-
Page 5: Table Of Contents
Table of contents N o t i c e ................Copyright.................... -
Page 6: Chapter 1. Introduction
All-In-One 17” TFT-LCD Panel PC. Product features Cybernet Manufacturing, Inc. is the all-in-one PC that combines a 17” TFT-LCD monitor and a desktop computer, offering an ultra light weight of 10Kg and a modern design that suits any working conditions. -
Page 7: Unpacking
Unpacking This product is packaged with cardboard paper for safe delivery. If there is a defect or missing part, contact the agency where you purchased the product. The box should contain the following items. 17” TFT-LCD monitor all-in-one PC main body PS-2 wheel mouse (Option) PS-2 keyboard (Option) Wireless keyboard &... -
Page 8: Other Peripherals
Other peripherals This PC supports the following peripheral devices PS/2 Keyboard and Mouse Printer (LPT1) One serial communication port (COM1) Four USB devices (compatible with USB 2.0) IEEE 1394 devices External speakers/headphones External microphones External audio devices External monitors External TVs External TV cable input (Option) [For reference] What is USB? -
Page 9: Chapter 2. About The Computer
Chapter 2. About the computer This chapter will briefly outline the computer exterior, buttons, LED indicator devices, and additional input/output connection devices. The front of the main body (control panel) Remote Control Window Power button : Turns the computer on and off. Buttons for adjusting the screen contrast Up( )/Down( ) : Adjusts the contrast of the TFT-LCD display. -
Page 10: The Rear Panel Of The Computer (Input/Output Connections)
The rear panel of the computer (Input/output connections) The following picture shows connectors that are for input/output connections located at the rear of the main body. Here we provide a brief explanation about the name and function of each connection port. Icon Connections PS/2 mouse connection... - Page 11 Audio input connections for external AV device connection Cable for external TV connection Power Adapter Input TV Cable Input Install Power Adapter Step: 1. Insert power cord into power adapter 2. Insert power adapter cable into “Power Adapter Input” of rear panel 3.
- Page 12 2. Insert TV cable into “TV Cable Input” of rear panel The Left Side of the main body (card reader panel) CF / MD MS / SM / SD / MMC Item Connections Indicates the card reader is working, LED Color : Green.
- Page 13 Audio Signal Input : (Optional) Audio signal input to TV tuner for DV or others video devices. S-Video Signal Input : (Optional) Video or Image’s signal input to TV tuner for DV or others video devices.
-
Page 14: Chapter 3. Starting Up The Computer For The First Time
Chapter 3. Starting up the computer for the first time This chapter will show you how to register a user ID for Windows and for this computer, and how to set up additional drivers and applications step by step. For Windows XP Home Edition Step 0: Windows XP and basic driver pre-setup This product is pre-setup with the latest driver file for Windows XP Home Edition, basic specifications and other optional specifications... -
Page 15: Step 1: To Set Up The Computer
tep 1: To set up the computer o set up the computer that is pre-setup with Microsoft Windows XP ome Edition in step 0: 1. Connect the mouse and keyboard that come with the main body and turn on the power of the main body. The following “Microsoft Windows Start”... -
Page 16: Step 2: The Installation Of Drivers For Other Peripherals
If you chose DSL or cable modem connections, the below dialog box will pop up. Follow the instructions to continue the network connection setup. 8. When you are finished with the Internet connection setup, a dialog box reading, “Are you going to receive verification service?” will be displayed. -
Page 17: Step 3: The Installation Of Software For Other Peripherals
Step 3: The installation of software for other peripherals kip this step if you do not use other peripherals and go to step 4. or efficient use of other peripherals (printers, serial communication evices, USB devices, IEEE 1394 devices, and game consoles/ MIDI evices), install the appropriate software (e.g. -
Page 18: Chapter 4 . U S I N G T H E C O M P U T E
Chapter 4. Using the computer In this chapter, we will give a brief explanation about the use of the computer To Use Windows XP Home Edition To use basic Microsoft Windows XP Home Edition programs and applications that are available with this OS, refer to the user’s guide (booklet), or the ‘Help and Support Center’. -
Page 19: Using Other Applications
Send your feedback to Microsoft Using other applications To use other applications obtained or purchased separately, refer to the user’s guide of each application provided by the software manufacturer. Partitioning the hard disk For user’s convenience, the hard disk built into this product is divided into two partitions (drive C and drive D). -
Page 20: Chapter 5 . C H A N G I N G T H E S E T U
Chapter 5. Changing the setup This chapter will briefly outline how to change the setup to suits each user using BIOS CMOS setup utility programs. This chapter also covers how to upgrade your computer system. BIOS CMOS setup utility This PC adopts BIOS based on Phoenix Technology’s latest Award BIOS 6.0 version. - Page 21 3. After a while, the following Award BIOS CMOS setup utility main menu will appear. Phoenix – AwardBIOS CMOS Setup Utility ► Standard CMOS Features ► PC Health Status ► Advanced BIOS Features ► Frequency/Voltage Control ► Advanced Chipset Features ►...
-
Page 22: Menu Descriptions
The Award BIOS CMOS setup utility offers the following 12 menus. Menu Menu descriptions Standard CMOS Features You can check basic specifications of the computer and change the settings. Advanced BIOS Features You can set up advanced features that are capable of upgrading the system and the booting order. - Page 23 4. To change the CMOS settings using the keyboard. The keys used to modify CMOS settings and their functions are as follows. Features How to use the keyboard To use ‘Help’ Press the <F1> key. To shift headings in ‘Menu/Topics’ Use the arrow keys.
-
Page 24: System Upgrades
System upgrades Hardware upgrades order to maintain this product’s normal operation and the user’s afety, we do not provide warranty services when users upgrade the ystem on their own. If you disassemble the computer, it may cause ystem damage or electrical shock. Please contact one of our sales agencies or customer support centers to upgrade the CPU, hard disk, or memory. - Page 25 [For reference] You can also find a BIOS flash utility for Windows in the ‘Software installation’ folder on the Cybernet Manufacturing, Inc. Master CD that is included with this product. 2. Move to the directory where the downloaded file is located and...
- Page 26 3. Update BIOS following the instructions displayed on the execution screen and restart the system to reflect the updated BIOS. V 1.2...
-
Page 27: Chapter 6 . R E I N S T A L L I N G T H E O
This chapter will explain how to do that. To reinstall the OS, you will need the Microsoft Windows installation CD and the Cybernet Manufacturing, Inc. Master CD that comes with this product. Please have these at hand before attempting to reinstall the OS. - Page 28 In most cases, it is necessary to restart the computer after installing drivers or utilities using the I-One Master CD. [For reference] When the video driver is installed, click [Start]-[Control panel]-[Appearance and themes]-[Display] to bring up the “Display Registration Information” screen and choose the desired color quality or screen resolution from the [setting] tab.
-
Page 29: Appendix 1 . T R O U B L E S H O O T I N
Appendix 1. Troubleshooting The table below is an outline of general problems that may occur during the use of SG along with suggested solutions. If any of these problems should occur, proceed with the instructions in the table below or refer to the ‘Troubleshooting”... - Page 30 The monitor appears Adjust the screen contrast using the buttons on the blank or the screen is front panel of the computer monitor. Should problems too dark. persist, contact the Customer Support Center. Mouse is not working. 1. Check if the mouse is properly connected to the PS/2 port located at the rear of the monitor.
- Page 31 Unable to shut off the This could stem from a number of reasons. First, turn computer. off the computer by pressing the power button for more than four seconds. If this does not work, unplug the power cord. If you turn on the computer this time, ‘scan disc’...
-
Page 32: Appendix 2 . P R O D U C T S P E C I F I C A T I O N S A N D S Y S T E M D I A G R A
Appendix 2. Product specifications and system diagram HARDWARE Intel Pentium-IV (up to 3.6GHz) / Celeron (up to 2.8GHz) processor Socket 478 type System Bus(FSB) : 800/533/400MHz L2 Cache : 128KB (Celeron) / 512KB (P-IV) Chipset SiS M661FX(North bridge) + SiS 963(South bridge) System Memory DIMM x 2 (up to 2GB) DDR400/333/266/200... - Page 33 Two Serial RS-232C port (1 Internal port for Touch screen support) One DB-25F Parallel port Microphone in / Speaker out / Line in One RJ-45 Ethernet connector Four USB port (USB v2.0 compliant) One IEEE 1394 port One VGA Out TV-Out : Composite Video(default) TV Cable In (optional) Touch screen (optional)
- Page 34 REGULATORY COMPLIANCE EMC / Safety CE EMC PHYSICAL CHARACTERISTICS Weight: 10 kg (Main Body only) Height: 455 mm Width: 425 mm Depth : 260 mm WARRANTY 1 year warranty standard MODEL CONFIGURATION Model DDR SDRAM / HDD ODD / OS V 1.2...
- Page 35 SiSM661FX & 963 Chipset SiS M661FX (Internal Garphic Engine SiS 315) 3.5” HDD SiS 963 (South Bridge)
-
Page 36: Appendix 3 . P R O D U C T W A R R A N T
Appendix 3. Product warranty About the product warranty 1. Keep the product warranty document and complete it with the necessary information when you make the purchase. 2. We do our best to provide the best quality assurance. 3. Even within the warranty period, charges can be applied for those services, which are charge-based. - Page 37 Problems resulting from trouble with the power source Recommendations and caution Position this product away from direct sunlight or magnetic waves. If those factors are unavoidable, find ways to protect the product. Please equip with (A.V.R) or (Power Conditioner) with enough capacity for a stable operation.