Laney Prism P20 Operating Instructions Manual page 25

1 R everb
2 D elay
3 C horus +D elay
4 C horus + Reverb
5 Flange + D elay
6 Tremolo + Reverb
7 R otary + Gate
8 Phaser + R everb
9 C horus + Compressor
10 A uto-Wah + Delay
11 Octaver + Delay
Other Effects Notes:
In some of the combination effects it is possible by using the Edit controls to turn off one of the effects if not required.
Many of the secondary effects have a mix option. If set to zero will eliminate that effect.
Example:
Chorus+Delay:
To defeat the delay and only have Chorus use B+Edit to set mix to zero.
Note some functions are not applicable to certain effects and so some Edit buttons will have no effect and will not illuminate
within that effect selection.
Example:
Reverb only has two adjustments:
1) Mix level... using the Edit knob.
2) Reverb length... by holding down the TAP control momentarily and adjusting the Edit knob for the desired decay time.
(Short anti-clockwise. Long clockwise direction) A,B & Bypass Edits will have no effect.
Effect Edits
Edit Tap Tap+Edit
Mix Length
Mix Time
Ch R ate C h Rate Dly T ime
Ch R ate C h Rate
Flg Rate Flg Rate Dly T ime
Trm R ate T rm Rate
Rty Rate Rty Rate Rvb Time
Phr Rate Phr Rate Rvb Time
Ch R ate C h Rate
W ah Sensitivity Dly Time Dly T ime
Octave Mix Dly Time Dly T ime
A+Edit B +Edit
Time Repeats
Ch D epth Dly Mix
Ch D epth Rvb Mix
Flg Depth Dly Mix
Trm Depth Rvb Mix
R ty D epth Rvb Mix
Phr D epth Rvb Mix
Ch D epth C omp Ratio
W ah Q Dly Mix
Dly Mix
B ypass+Edit
Dly Repeats
Gate T hreshold
Phr Feedback
Comp Gain
Dly Repeats
Dly Repeats
25