Laney Prism P20 Operating Instructions Manual page 20

STORING & EDITING BUILT IN SOUNDS
Channel Storing:
In LIVE, HERO or CHANNEL mode you can make use of the store function.
In HERO mode if you edit the sounds you can not overwrite the HERO setting. However you can store your edited
version to one of the four channels.
Simply make the changes you want to any of the amplifier controls or Effects to get your desired sound. Then simply
1
press and hold the desired channel button until the store light flashes.
Now whenever you select the channel again it will have your new sound ready to use. (Even after power down).
You then have other options if you go to the channel again and decide the sound you chose is not quite right just
make the adjustments and then press and hold the channel button again to overwrite to the new sound.
If you don't want to overwrite this channel and you want the new sound in another channel simply press and hold
the new channel button to store. (The original will remain in the first channel)
Changing the built in effects:
In LIVE mode you can adjust the edit functions in any of the effects and overwrite
the factory settings.
So if you want your standard delay to be 300mS instead of the 423mS factory
setting, simply make the adjustment, then press and hold the LIVE channel button
until the store light flashes.
15
The new setting will be your default whenever you select that EFFECT.
(See Edit chart for options. Page 25)
20