Setup For Input Signals; Component / Rgb-In Select; Yuv / Rgb-In Select - Panasonic TH-50LFC70U Operating Instructions Manual

Setup for Input Signals

Component / RGB-in select

Component RGB
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P , P signals "Component"
B R
RGB signals "RGB"
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).

YUV / RGB-in select

YUV RGB
Select to match the signals from the source connected to the DVI input terminals.
YUV signals "YUV"
RGB signals "RGB"
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT or DVI-D IN).
54