Memory Viewer Function - Panasonic TH-50LFC70U Operating Instructions Manual

Memory Viewer Function

The Memory Viewer function makes it is possible to display the video and pictures which are stored in the USB
memory when the USB memory is inserted into the display.
What you can display with the Memory Viewer function
The following ¿ les are supported.
Picture Extension
jpg/jpeg
bmp
Video Extension
mov
avi
mp4
mpg/mpeg
wmv
Notes:
• The maximum size of ¿ le is 2 GB.
• The maximum number of ¿ le/folder is up to 1000. If it exceeds, the folder cannot display and an error message
appears.
• You cannot play the ¿ les which are protected by Digital Rights Management (DRM).
• The maximum number of ¿ les that can hold resume information is 50. If it exceeds 50, the oldest information will
be deleted.
• It may be impossible to resume playing the ¿ le from the stopped position.
• It may be impossible to play some ¿ les even if they are in the supported format.
Applicable device
The function is compatible with USB memories sold in the market. (Devices with security feature are not supported)
Devices not formatted with FAT16 or FAT32 cannot be used.
28
Format
Maximum resolution: 8000 × 8000
Maximum resolution: 8000 × 8000
support: 1, 4, 8, 16, 24, 32 bit
Video codec Audio codec
H.264/AVC AAC
MotionJpeg Linear PCM
H.264/AVC mp3
MotionJpeg AAC
Mpeg4 Linear PCM
H.264/AVC AAC
Mpeg4 Mpeg4 AAC-LC
Mpeg2 Mpeg1 Layer2
WMV9 WMA
Video format Audio format
Maximum:
48 kHz 2 ch
Maximum: (It is up to 16 kHz
1920 × 1080/30 fps stereo when the
codec is linear
PCM)