MULTI PIP
You can display two pictures, such as a video image and computer image, in a two-screen display.
Notes:
• If "Input lock" in Options menu is set to other than "Off", two screen display function isn't available (see page 59).
• 2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in
two-screen display.
MULTI PIP Settings
Set the functions for two-screen display in "MULTI PIP Settings" in the Setup menu. (see page 46)
PIP Mode
Pic in Pic
Displays two input images combined.
SLOT INPUT
Note:
SD signal is displayed in 4:3 mode on the sub screen.
Using Two Screen Display
Set "MULTI PIP" in "MULTI PIP Settings" to "On" (see page 46).
Two screen display appears.
Using the FUNCTION button
On/Off of "MULTI PIP" switches.
"MULTI PIP Settings" menu appears.
Switching Sub Screen Position
Press to switch the sub screen position.
Note:
Alternatively, "Sub screen size" and "Sub screen position" in "MULTI PIP Settings" can be used for the same
operation (see page 46).
The following four system inputs are combined:
Main screen input
A Panasonic APPLICATION
Sub screen input
B SLOT INPUT
C HDMI1/HDMI2/DVI/DIGITAL LINK/COMPONENT/PC
D VIDEO
Note:
Two screen display cannot be displayed with the same system
inputs such as HDMI1-DVI combined.
Note:
Please use the "Function Button Settings" to set the
FUNCTION button (see page 51).
Changing the Size of Sub Screen
Press to change the size of the sub screen.
27