Programming For Dvd - GE RM24961 Instruction Manual

Programming for DVD

The DVD button can be used for a DVD
player.
1. Manually turn on the
DVD player.
2. Press the DVD button.
It will light for one
second and then go out.
3. Press and hold the
SETUP button until
the DVD button remains
lit, then release
the SETUP button.
4. Find the three digit code
for your DVD player
to program in the code list
Enter the code using the
Number Buttons.
After your code is
entered, the DVD
player will turn off.
5. Aim the remote at your
device and press the
button. Your
device should turn off.
Note: If your device
does not respond, try
all the codes for your
brand. If the codes do
not work, or your brand
is not listed, try the
Code Search method
on page 9.
6. With your device on,
press CHAN+. If the
device responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
5
DVD
SETUP
1 2 3
4 5 6
7 8 9
0
ON•OFF
CHAN +
+
DVD CODE