ON•OFF The ON•OFF button operates the same as your original remote (note: some RCA, GE and ProScan models require you to press the device key to turn the device on and the ON•OFF key to turn the device off).
94906 Revised Size 1/21/02 2/25/02 TV•V CR The TV•VCR button operates the TV•VCR function of your VCR. ENTER The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process.
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 4 3. Press and slide the battery cover back into place. Note: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required.
94906 Revised Size 1/21/02 2/25/02 Programming For TV 1. Manually turn on the TV. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit).
94906 Revised Size 1/21/02 2/25/02 Programming For VCR 1. Manually turn on the VCR. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit).
2/25/02 Programming For Cable Box or Satellite Receiver The CAB • SAT button is defaulted to RCA/GE/ProScan DBS systems, however other DBS systems can be programmed to this button. 1. Manually turn on the cable box or satellite receiver. 2. Press and hold the...
94906 Revised Size 1/21/02 2/25/02 Programming for DVD•AUX The DVD•AUX button can be used for a DVD play- er. It can also be assigned to any other type of device (another TV , VCR, DVD, CD Player, or audio receiver).
94906 Revised Size 1/21/02 2/25/02 Programming With Code Search If your TV, VCR, DVD Player, cable box or satel- lite receiver does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.
94906 Revised Size 1/21/02 2/25/02 Retrieving Codes If you need to find the three-digit code for your TV, VCR, DVD Player, DBS Receiver, or Cable Box after your device is set-up using Code Search, use this procedure. 1. Press and hold SETUP...
94906 Revised Size 1/21/02 2/25/02 Television Menu Function The TV Menu is used to make changes in the TV settings such as setting color, channels, timers, etc. Entering the TV Menu Mode: Push the TV button on the remote. 2. Push the MENU button.
Page 12
94906 Revised Size 1/21/02 2/25/02 Exiting the TV Menu Mode: To exit the Menu Mode and clear the TV screen push the TV button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of TV Menu Mode and will revert to it’s...
CURSOR RIGHT/LEFT CH+/- keys will operate as CURSOR UP/DOWN. For RCA, GE, and ProScan DBS Systems, push- ing the MENU button will select the highlighted item. The numberic buttons may also be used to select the MENU choice.
Page 14
94906 Revised Size 1/21/02 2/25/02 Exiting the DBS Menu Mode: To exit the Menu Mode and clear the TV screen push the CBL•SAT button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of DBS Menu Mode and will revert to it’s normal mode...
94906 Revised Size 1/21/02 2/25/02 Sleep Feature This feature will turn off your TV at the time you choose from 1 to 99 minutes. To P rogram Sleep Feature: 1. Press and hold the SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button.
94906 Revised Size 1/21/02 2/25/02 Trouble Shooting Pr oblem Solution A) Replace the batteries Indicator light not blinking when you (with fresh, new AAA press any key Alkaline batteries). B) Check that batteries are properly installed. A) Try all the codes list-...
94906 Revised Size 1/21/02 2/25/02 Pr oblem Solution A) Make sure you have No response after pressing a key new batteries, and you are aiming your remote at your devices. B) Check that batteries are properly installed. See page 2.
ON•OFF El botón de ON•OFF funciona igual que su remoto original (nota: algunos modelos de RCA, de la GE y de ProScan requiérale presionar el clave del dispositi vo para dar vuelta el dispositivo encendido y el clave ON•OFF para dar vuelta al dispositivo apagado).
94906 Revised Size 1/21/02 2/25/02 ENTER El botón de "ENTER" se utiliza para terminar la selección de canal para algunas marcas de la TV. También se utiliza para terminar el proceso de la entrada del código. VOL & CHAN Las flechas VOL (volumen) y CH (del canal) aumente o dis- minuya los números de canal o volumen.
94906 Revised Size 1/21/02 2/25/02 Programación para la Televisor Gire manualmente la prensa de la TV Presione y sostenga el botón de SETUP hasta que las luces de INDICATOR LIGHT, después suelta el botón de la SETUP. Presione y soltar el botón de la TV (sigue...
94906 Revised Size 1/21/02 2/25/02 Programación para el VCR 1. Gire manualmente la prensa del VCR. Presione y sostenga el botón de SETUP hasta que las luces INDICATOR LIGHT, después suelta el botón de SETUP. Presione y soltar el botón del VCR...
94906 Revised Size 1/21/02 2/25/02 Programación para la Caja Del Cable El botón de CBL•SAT se omite los sistemas de RCA/GE/Proscan DBS, sin embargo,otros sistemas de DBS se pueden programar a este botón. 1. Gire manualmente La caja del cable.
94906 Revised Size 1/21/02 2/25/02 Programación para el DVD•AUX El botón de DVD•AUX omite los sistemas de RCA/GE/ProScan DBS. El botón de DVD•AUX permite que usted asigne otra TV, VCR, o caja del cable. To asigna otro dispositivo al botón de DVD•AUX:...
94906 Revised Size 1/21/02 2/25/02 Programación con Búsqueda del Código El botón de DVD•AUX se puede utilizar para un jugador de DVD. Puede también ser asignado a cualquier otro tipo de dispositivo (otra TV, VCR, DVD, jugador de CD, o receptor audio, receptor satellite)..
94906 Revised Size 1/21/02 2/25/02 Extraer Códigos Si usted necesita encontrar el código tridigital para su caja de la TV, del VCR o del cable, DVD player después de que su dispositivo set-up usando CODE SEARCH, utilice este pro- cedimiento.
CURSOR RIGHT/LEFT CH+ / - los claves funcionarán como CURSOR UP/DOWN Para RCA, la GE, y ProScan TVs, empujando el botón del MENU seleccionarán el item destacado. Los botones numeric se pueden también utilizar para seleccionar la opción del MENU.
Page 28
94906 Revised Size 1/21/02 2/25/02 Dar salida al modo del menú de la TV Para salir del modo y del claro del menú la pantalla de la TV empuja el botón de la TV en el remoto. La luz de Indicador debe salir indicando que el remoto ahora está...
CURSOR RIGHT/LEFT CH+ / - los claves funcionarán como CURSOR UP/DOWN Para RCA, la GE, y ProScan TVs, empujando el botón del MENU seleccionarán el item destacado. Los botones numberic se pueden también utilizar para seleccionar la opción...
94906 Revised Size 1/21/02 2/25/02 Dar salida al modo el menú de la DBS: Para salir del modo y del claro del menú la pantalla de la TV empuja el botón de la CBL•SAT en el remoto. La luz de...
94906 Revised Size 1/21/02 2/25/02 Dejan la televisión dirigida alejada. (La característica del sueño no trabajará a menos que el remoto se deje la television dirigida.) Para dar vuelta Apagado Al Temporizador Del Sueño: El programa del temporizador del sueño será cancelado y restauración a cero...
94906 Revised Size 1/21/02 2/25/02 Pr oblema Solución VCR que no Como característica de seguridad registra en su remoto, usted debe pre - sionar el botón de REC dos veces. El canal hacia arriba Debido a alguno diseña, el remo - y hacia abajo no to original realizará...