Table of Contents
Advertisement
5.5 Protocol Setup
MAIN MENU
CAMERA SETUP
FOCUS SETUP
PAN TILT SETUP
PATTERN SETUP
PROTOCOL SETUP
RESET MENU SETUP
EXIT MENU
Protocol
Change the protocol on the camera to match your speed dome controller. Adjust
the protocol from Pelco D or P.
Address
Change the address on the camera so that you can control more than one camera
on your controller. Addresses can be set 1~255.
Baudrate
Set the baudrate of the camera. Can set the rates
1200BPS/2400BPS/4800BPS/9600BPS
Random Address
When using the address 255, press the IRIS-OPEN button to enter the OSD and
choose the 'PAN TILT SETUP' sub-menu. The Return option (as shown above) will
become 'Random Address'. When in 'Random Address' press the 'IRIS-OPEN' key
and this will create a random address
Return
Return to the previous Menu.
Exit Menu
Exit the menu.
16
PAN TILT ZOOM
PROTOCOL:
ADDRESS:
BAUDRATE:
RETURN
EXIT MENU
PELCO D
001
9600BPS
9
Advertisement
Table of Contents
