Setup Steps; Needed Tools - Stanley QEL 200 EL Series User Manual

Setup Steps

1

Needed Tools

Steps
1
Conduct QES Site Survey
2
Download Software or Install ACS
Server
3
Configure and Install Gateway
4
Install Wireless Locksets or QIC
Wireless System
2
Tools
• Site Survey Kit
• Site Survey Kit Quick Start Guide
• If you are downloading the software,
you will need a Host Computer (where
you installed the ACS) and the ACS
User Guide
• If you are Installing the ACS Server, see
the ACS Quick Start Guide that came
with the package
• Gateway Installation Instructions and
Template
• PC Computer with Windows 7 or above
• Host Computer's IP Address, Subnet
Mask, and Gateway Number)
• If you are installing Wireless Locksets,
you'll need: Lockset Installation
Instructions, Template, and Quick Start
Guide, Core/Keyset or Construction
Core Pack, Wireless Board, Temporary
Operator Card, Operator Cards
• If you are installing the QIC, you'll
need: QIC Qick Start Guide
3 4
18