Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Seeburg G3 dp
Summary of Contents for Seeburg G3 dp
-
Page 1: User Manual
User Manual G3 dp Last update: 07/2010... -
Page 2: Table Of Contents
G3 dp Contents Foreword ................... 3 Safety instructions ..............4 Part 1 – Connections and indicator functions Connectors ................6 Control elements ............... 7 Status indicators ................ 7 Part 2 - Operation System start-up ................. 8 Adjusting sound levels............... 8 Accessing presets .............. -
Page 3: Foreword
G3 dp Foreword The G3 dp with integrated 2x1500 Watt digital amplifier electronics and DSP controller houses six 8” low-mid drivers and three 1.4” hf-drivers, using the same technology as the Galeo line array. Unlike the Galeo, each G3 has a fixed vertical dispersion of 20°... -
Page 4: Safety Instructions
Safety instructions acoustic Even with a low power input the G3 dp unit can produce a hazardous sound pressure level that may cause acute and permanent damage to the ear. Never sit or stand in the immediate vicinity of the loudspeaker during operation and always wear ear protection. - Page 5 G3 dp Do not operate the G3 dp if you have any concerns regarding safety or if the loudspeaker box should malfunction. The equipment has no user-serviceable parts inside. In the event of repair, please contact your dealer or qualified personnel respectively.
-
Page 6: Part 1 - Connections And Indicator Functions
G3 dp Part 1 – Connections and indicator functions Connectors XLR In: The G3 dp is controlled via a conventional symmetrical NF • cable. For signal loop-through use the male Loop Thru XLR In. For full conduction the connected signal source should deliver at least 6 dBU undistorted. -
Page 7: Control Elements
G3 dp Control Elements MODE button: changing to control modes Status / Level and Presets. • SET button: Setting of various values and Mute on/off • Status indicators Mute LED: red light when the system is muted (press Set button in •... -
Page 8: Part 2 - Operation
G3 dp Part 2 – Operation System start-up The previously selected setting is maintained when the equipment is switched on. The system is then in Status mode. If the red Mute LED lights up according to the previous setting, there is no signal being transmitted. If the Set button is pressed once, the mute function is deactivated, the Mute LED goes off and the system transmits a signal. -
Page 9: Accessing Presets
-Low (soft): The low-mids are reduced for better speech intelligibility. • Reduces the low-mid summation taking place when several G3 dp are operated in a line. • -Low (hard): The low-mids are reduced even mor for better speech intelligibility.