CORIO are the registered Trademarks of TV One. All other trademarks are the property of their respective holders. Features The 1T-PCDVI-PCDVI has many features that enable it to perform in a superior manner. Among those features you will find: DVI and Analog Inputs and Outputs ...
SPECIFICATIONS Video Inputs DVI-D 1x via DVI-I Connector Analog RGBHV 1x via HD-15 Connector Analog Component (YPbPr/YUV) 1x via 3x RCA Connectors Video Outputs DVI-D 1x via DVI-I Connector Analog (RGBHV) 1x via HD-15 Connector Formats Supported Input RGBHV, YPbPr, YUV Output RGBHV Maximum I/O Resolution...
Page 6
WSXGA 1680x1050 60 Progressive WUXGA 1920x1200 60 Progressive 2.2 Supported Output Formats and Resolutions The 1T-PCDVI-PCDVI can provide a large number of output resolutions in the RGBHV format as shown in the following table: Resolution V. Rate/Hz Scan Format / Connector...
Power On/Off NOTE: Item 5 is multipurpose: Pressing the “+” key (without first pressing the Menu/Enter key) will step the 1T-PCDVI-PCDVI through the various possible input sources (YPbPr, PC or DVI) in a sequential manner. Next, pressing the “-“ key (without first pressing the Menu/Enter key) causes the 1T-PCDVI-PCDVI to execute an automatic alignment of the PC signal components such as picture centering, color, etc.
Page 8
Connect the appropriate cables to the desired connector. Use only the highest quality cables. The 1T-PCDVI-PCDVI is very capable and will automatically identify, accept and scale a host of input types and resolutions (including analog and PC type signals). The output however will be either DVI with a resolution of 480i to 1080p or RGB with resolutions from VGA to WUXGA.
OPERATING THE UNIT The 1T-PCDVI-PCDVI can be operated from either the front panel controls or via the included Infrared Remote Control. Since Infrared is the control method used most often by the majority of users, please take the time to familiarize yourself with the location and function of the various control buttons on the Controller.
Page 10
5.1.1 Menu Navigation: Pressing the “Menu” button will display the OSD menu. If you are using the front panel control method, you select the desired function by using the “+” and “-“ keys to navigate to the desired function and then press the Menu/Enter button again to make the selection.
TROUBLESHOOTING If the 1T-PCDVI-PCDVI Scaler does not appear to be functioning make certain that the source and all other devices connected to the unit are functioning correctly by connecting each device currently connected to the 1T-PCDVI-PCDVI’s outputs directly to the source using a short length of cable.
Create a technical support request on the site and our support team will respond within a short period of time. LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase.
REGULATORY COMPLIANCE The 1T-PCDVI-PCDVI Scaler has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. These Products and Power Adapters are RoHS Compliant.
Page 14
Hsin Tai Wu Road, Hsichih No. 1900 Shangcheng Road Taipei Hsien 22101 Pudong, Shanghai Taiwan R.O.C. China 200120 Tel +886 2 2698-2296 Tel +86 21 5830-2960 Fax +886 2 2698-2297 Fax +86 21 5851-7949 sales.asia@tvone.com Email: sales.china@tvone.com www.tvoneasia.com www.tvonechina.com End of Manual...
Need help?
Do you have a question about the 1T-PCDVI-PCDVI and is the answer not in the manual?
Questions and answers