Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tvone 1T-VS-622
Summary of Contents for Tvone 1T-VS-622
- Page 1 Instruction Manual 1T-VS-622 Video to HDMI Scaler...
-
Page 3: Table Of Contents
Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information... -
Page 4: Introduction
INTRODUCTION Thanks for purchasing this 1T-VS-622 Video to HDMI Scaler from TV One. This Scaler converts analog Composite Video or Component S-Video to a fully compliant HDMI Output. It also provides audio flexibility by embedding external audio into the HDMI output signal as well as providing separate Toslink and R/L analog Stereo audio outputs. -
Page 5: Specifications
SPECIFICATIONS Video Input/Output CV or SV Video Input 1x RCA Connector, 1x S-Video Connector HDMI V1.2 Output 1x via Type A Connector Video Performance Standards Compliance HDMI v1.2, HDCP 1.1, DVI 1.0 Output Resolutions up to 1080p PC up to WUXGA, HD 3-D Motion Adaptive, 3-D de-interlacing, 3:2/2:2 Video Processing Pull Down Detection/Recovery. -
Page 6: Checking Package Contents
576i 50Hz Note: By default the 1T-VS-622 automatically detects the resolution of the HDMI display device however you can manually control that selection using the OSD menu structure . Leave the Resolution in the “Native” position on the OSD menu to enable the Automatic Detection capability. -
Page 7: Connecting The Hardware
622 and the display. Plug in the provided AC adapter, first to the 1T-VS-622 and then to an active AC power source. Lastly, turn on the PC source and HDMI display device. (The 1T-VS-622 has no power switch and will begin to function as soon as it has the AC adapter connected to it.) Notes: (1) You may connect either a Composite Video Input or an S-Video input but you cannot connect both inputs at the same time. - Page 8 Once the adjustment has been made, use the Menu button and + and – buttons to navigate to where you can exit the OSD. XGA Reset: Depressing and holding the Menu button and then the + button returns the settings to factory defaults and sets the output to XGA. ...
-
Page 9: Troubleshooting
TROUBLESHOOTING Faulty cables are the most common problem associated with the 1T-VS-622. Make certain you are using the highest quality cables available. In the event of trouble with the unit, inspect the cables for damage and make sure they are completely seated in their connectors. -
Page 10: Regulatory Compliance
REGULATORY COMPLIANCE The 1T-VS-622 has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. These Products and Power Adapters are RoHS Compliant. - Page 11 Hsin Tai Wu Road, Hsichih No. 1900 Shangcheng Road Taipei Hsien 22101 Pudong, Shanghai Taiwan R.O.C. China 200120 Tel +886 2 2698-2296 Tel +86 21 5830-2960 Fax +886 2 2698-2297 Fax +86 21 5851-7949 sales.asia@tvone.com Email: sales.china@tvone.com www.tvoneasia.com www.tvonechina.com End of Manual...
Need help?
Do you have a question about the 1T-VS-622 and is the answer not in the manual?
Questions and answers