Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tvone 1T-VS-668
Summary of Contents for Tvone 1T-VS-668
-
Page 1: Instruction Manual
Instruction Manual 1T-VS-668 Universal Presentation Switcher/Scaler... -
Page 2: Table Of Contents
Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contacts... -
Page 3: Introduction
Signal Distribution Amplifiers and Cat.5 Transmission Systems. Liability Statement Every effort has been made to ensure that this product is free of errors. tvONE cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. -
Page 4: Specifications
SPECIFICATIONS: Video Inputs HDMI (DVI Compatible) 3x via HDMI Connector Analog RGBHV 3x via HD-15 Connector Analog Component (YPbPr/YUV) 1x via 3x RCA Connectors Composite Video 1x NTSC or PAL via RCA Connector Audio Inputs Analog Audio (Stereo) 2x via RCA (R/L), 6x via 3.5mm mini Video Output HDMI Video (v1.2) 2x via HDMI Connector... -
Page 5: Checking Package Contents
NOTE: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or tvONE immediately. Have the Model Number, Serial Number and Invoice available for reference when you call. -
Page 6: Connecting The Hardware
CONNECTING THE HARDWARE Referring to the drawings below, connect the proper cables and then connect the AC power adaptor. Rear Panel Connectors: The rear panel has the connectors required to interface the 1T- VS-668 to the External Inputs, Outputs and Power Supply. The numbers above and below the drawing relate to the connector directly above or below the number. - Page 7 1T-VS- 668. NOTE: To realize maximum quality and performance, use only the highest quality cables with the 1T-VS-668. Low quality cables will cause degradation of the signal quality and limit the distance between both the source and destination...
-
Page 8: Operating The Unit
OPERATING THE UNIT The 1T-VS-668 can be operated from either the front panel controls or via the included Infrared Remote Control. Since Infrared is the control method used most often by the majority of users, please take the time to familiarize yourself with the location and function of the various control buttons on the Controller. - Page 9 Remote Control Operation POWER: Press this button to switch the device on or to set it to standby mode. _____ 1 2 HDMI1/2/3, PC1/2/3, CV and COMP: Direct source selection keys. Press one of these keys to switch to the required source. MENU: Press this button to enter the OSD 2 ____ EXIT: Press this button to exit the menu or...
-
Page 10: Menu Navigation
Using the On Screen Display Menus Regardless of whether you operate the 1T-VS-668 from the front panel or using the Remote Controller, you will need to become familiar with the OSD (On Screen Display) menu structure if you wish to take full advantage of the capability of the product. -
Page 11: Main Menu
Main Menu Sub Menu 3rd Menu 4th Menu DISPLAY (cont.) SIZE (cont.) LETTERBOX UNDER 2 UNDER 1 MODE INFO INFO* INPUT HDCP (HDMI mode only) AUTO SETUP (PC mode only) H_POSITION V_POSITION PHASE CLOCK XGA* WXGA/XGA WXGA RESET CONTRAST COLOR 0-60 [30] BRIGHTNESS 0-60 [30]... - Page 12 Items in BOLD with an asterisk (*) are the factory default settings. Items in brackets [ ] are the default values for those settings. RS-232 Protocol The connection between 1T-VS-668 and controller with RS-232 modem cable. 1T-VS-668 Remote Control Assignment...
- Page 13 Description Command S POWER x (x= 0 or 1) 0=OFF 1=ON R POWER Reports the numeric value for POWER setting (as above) 1=HDMI 1 5=VIDEO 2=HDMI 2 6=PC 1 S SOURCE x (x= 1 - 8) 3=HDMI 3 7=PC 2 4=YPbPr 8=PC 3 R SOURCE...
-
Page 14: Telnet Control
Line feed (LF) command. Commands are case-insensitive. Telnet Control Before attempting to use the Telnet control, ensure that both the 1T-VS-668 (via the LAN port) and the PC/Laptop or control system being used are connected to the same active network. - Page 15 On a PC/Laptop that is connected to same active network as the Scaler, open a web browser and input the unit’s IP address on the web address entry bar. The browser will bring up the 1T-VS-668’s Web GUI control page (see below for reference). All functions of the unit are controllable from this single screen.
-
Page 16: Troubleshooting
If the signal is present under those conditions, make certain that the power is present to the 1T-VS-668. If it is, check all cables for damage. Cables should be undamaged, as short as possible and should be premium quality. -
Page 17: Limited Warranty
In no event shall tvONE be responsible or liable for any damage arising from the use of such defective products whether such damages be direct, indirect, consequential or otherwise, and whether such damages are incurred by the reseller, end-user or any third party. -
Page 18: Regulatory Compliance
REGULATORY COMPLIANCE The 1T-VS-668 Universal Presentation Switcher/Scaler has been tested for compliance with the appropriate FCC and CE rules and regulations. The power adaptor/supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, regulations and/or guidelines. This product and power adapter is RoHS compliant.
Need help?
Do you have a question about the 1T-VS-668 and is the answer not in the manual?
Questions and answers