INTRODUCTION Thanks for purchasing this 1T-VS-626 HDMI Scaler from TV One. This HDMI Scaler converts between a variety of PC and HD resolutions providing both an HDMI Input and Output. It also provides audio flexibility by accommodating audio embedded in the HDMI signal or from analog or digital sources and outputting those same formats.
1T-VS-626 and then between the 1T-VS-626 and the display. Plug in the provided AC adapter, first to the 1T-VS-626 and then to an active AC power source. Lastly, turn on the HDMI source and display device. (The 1T-VS-626 has no power switch and will begin to function as soon as it has the AC adapter connected to it.)
1T-VS-626 Rear Panel OPERATING THE UNIT The 1T-VS-626 is controlled via an On Screen Display (OSD) menu structure. Much of the operation of the scaler is done automatically however there may be an occasion where an adjustment is needed, particularly if the input signals are not presented at standard levels.
This will reset the unit to factory default. TROUBLESHOOTING Faulty cables are the most common problem associated with the 1T-VS-626. Make certain you are using the highest quality cables available. In the event of trouble with the unit, inspect the cables for damage and make sure they are completely seated in their connectors.
REGULATORY COMPLIANCE The 1T-VS-626 has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. This Product and Power...
Need help?
Do you have a question about the 1T-VS-626 and is the answer not in the manual?
Questions and answers