Test Width; Paper Out Dots; System Memory; Print Statistics - Digital Equipment LG Plus Series Setup Manual

Test Width

This parameter permits you to run the self–tests at full width or 80 columns.

Paper Out Dots

This parameter is used to adjust the paper out distance from the perforation;
you can specify where the last line on the page will print when there is a
paper out condition. Setting this parameter prevents printing on the platen.
Only Customer Service Engineers should set this parameter.

System Memory

This parameter displays the amount of RAM installed. (This value cannot be
changed.)

Print Statistics

You can view various printer statistics, such as hours of usage, and refer to
these figures for preventive maintenance purposes. Printer statistics
accumulate continuously; they do not reset when you turn off the printer. All
of the printer statistics are set to zero at the factory after burn-in testing.
On
:
Print
:
Print Strokes
Print Lines
11 inch Pages
4–54
The cumulative time in hours the printer has been
powered on. The range is 0 to 30,000 hours.
The cumulative time in hours the printer has actually
been printing. The range is 0 to 30,000 hours.
The cumulative number of back-and-forth shuttle
:
strokes the printer has printed during normal printer
operation. The range is 0 to 2,147,483,648 shuttle
strokes.
The cumulative number of lines the printer has
:
printed. The range is 0 to 2,147,483,648 print lines.
The cumulative number of pages the printer has
:
printed. The range in print pages is 0 to
2,147,483,648 total inches of paper movement
divided by 11.