Digital Equipment LG Plus Series Setup Manual page 40

Tractor Lock
Ribbon Path
Diagram
4. Pull the paper above and behind the ribbon mask. (Refer to the ribbon
path diagram on the shuttle cover.) Load the paper on the left tractor
sprockets and close the tractor door. Normally, you should not need to
adjust the position of the left tractor.
5. If adjustment is necessary, unlock the left tractor. Slide the tractor until it
is directly to the left of the number "1" on the paper scale and lock it.
(You can also use the paper scale to count columns.)
To avoid damage to the printer caused by printing on the platen, always
position the left tractor unit directly to the left of the "1" mark on the
paper scale.
2–18
Tractor Door
Paper
Figure 2–13. The Left Tractor
CAUTION
Paper Scale