Important Safety Information - Algo 8188 Installation/Configuration Manual

Important Safety Information

INSTALLATION
An improperly installed 8188 Ceiling Speaker could fall from the ceiling
and cause serious injury or death. The four screw mounting clamps will
adequately support the speaker if the ceiling material is sufficiently
strong. An optional T-bar mounting bracket (Algo 8188-TBR) is
recommended for acoustic ceiling tile and may be required for
compliance with local building code. A ¼-20 threaded insert nut on top
of the speaker housing can accept an eye-bolt (not supplied) for chain
or cable support and additional safety.
Local building codes may require one or more additional safety
measures, particularly in earthquake prone regions.
EMERGENCY COMMUNICATION
If used in an emergency communication application, the 8188 Ceiling
Speaker should be routinely tested. SNMP supervision is recommended
for assurance of proper operation. Contact Algo for other methods of
operational assurance including the use of the integrated microphone
for automated "sound to air" acoustic testing.
DRY INDOOR LOCATION ONLY
The 8188 Ceiling Speaker is intended for indoor dry locations only. For
outdoor locations Algo offers weatherproof speakers and strobe lights.
CAT5 or CAT6 connection wiring to an IEEE 802.3af compliant
network PoE switch must not leave the building perimeter
without adequate lightning protection.
No wiring connected to the 8188 Ceiling Speaker may leave the
building perimeter without adequate lightning protection.
Document 90-00067 A
2014-09-12
Page 5
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com