Resetting The Touch Controls; Manual Reset; Automatic Reset - Miele KM 5676 Operating Instructions Manual

Resetting the touch controls

Automatic reset

To ensure the cooktop functions
properly the touch controls will
automatically reset:
– when the cooktop is connected to
the power supply,
– if there is an interruption to the power
supply, and
– during use in response to changing
light conditions.
During the automatic reset of the touch
controls the Child Safety Lock indicator
lights and the cooktop cannot be
turned on.
If the automatic reset could not be
completed:
– an A will light in the front left and right
burner displays,
– a F will light in the rear left burner
display, and
– the right rear burner display and the
timer display will show numbers.
In this case the touch controls must be
manually reset.
12

Manual reset

^ Make sure no direct light (sun or
artificial) beams on the cooktop. The
surrounding area of the cooktop
should not be completely shaded or
brightly lit.
^ Make sure the cooktop and the touch
controls are not covered. Remove all
pots and pans, and clean the
cooktop if necessary.
^ Trip the circuit breaker to the cooktop
or turn off the power main for 1
minute.
The touch controls will automatically
reset when the power is restored.
If the problem persists, contact Miele
Technical Service.