Loading Documents; How To Load Documents; Using The Adf (Mfc-J4420Dw) - Brother MFC-J4320DW Basic User's Manual

3

Loading documents

How to load
documents
You can send a fax, make copies, and scan
from the automatic document feeder (ADF)
and from the scanner glass.
Using the ADF
(MFC-J4420DW)
The ADF can hold up to 20 pages and feed
each sheet individually. Use paper that is
within the sizes and weights shown in the
table. Always fan the pages before placing
them in the ADF.
Document Sizes and Weights
Length: 5.8 to 14.0 in.
(148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Paper weight: 17 to 24 lb
(64 to 90 g/m

How to load documents

IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, glued, or taped.
• DO NOT use cardboard, newspaper, or
fabric.
• DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Make sure documents with ink or correction
fluid are completely dry.
3
3
3
2
)
3
a
Lift up and unfold the ADF document
support (1).
b
Fan the pages well.
c
Adjust the paper guides (1) to fit the
width of your document.
1
d
Place your document face down, top
edge first in the ADF underneath the
guides until you feel it touch the feed
rollers and the Touchscreen displays
ADF Ready.
3
1
3
15