Related Manuals for Keys Fitness ST-2600
Summary of Contents for Keys Fitness ST-2600
-
Page 1: Owners Manual
TRAINER STRENGTH ST-2600 OWNERS MANUAL INCLUDES: SAFETY NOTICE HARDWARE IDENTIFIER ASSEMBLEY INSTR UUCTIONS EXPLODED DRAWING PARTS LIST ARRANTY ORDER ING PARTS... -
Page 2: Safety Tips
***Please read all instructions carefully before using this roduct*** SAFETY TIPS Consult with your physician before engaging in any vigorous exercise. Know your heart rate and/or pulse as well as your physician-recommended heart rate training zone. Proper medical clearance is recommended for anyone beginning an exercise program especially if you are 35 rs of age or older or suffer from Warm-up before any exercise program with 8 minutes of aerobic-like activity followed by •... -
Page 3: Before You Begin
Keys Fitness Products is not responsible for the misuse of any Keys Fitness Products nor for any injury sustained while using any Keys Fitness Products. The consumer uses any or all of Keys Fitness Products at their own risk BEFORE YOU BEGIN Before you begin assembly of your keys fitness product, please take a moment to review the hardware and parts list on the following pages. - Page 4 HARDWARE IDENTIFIER...
- Page 5 HARDWARE IDENTIFIER...
-
Page 6: Assembly Instructions
Before beginning the assembly process take a few moments to familiarize yourself with the specific parts and hardware. Make sure all the parts are included in the carton and examine them for any damage that may have occurred in transport. During assembly it is only necessary to tighten the nuts and bolts to finger tight. - Page 7 ASSEMBLY INSTRUCTIONS STEP #2 Attach the front base (#21) to the mainframe (#18) with two bolt M10X25(#A4), four washers 10 (#B1) and two nylon nuts M10 (#C1) Attach the mainframe/front base assembly to the center of the cross bar (#10) usi bolts M10x75 (#A3), four washers 10 (#B1) and two nylon nuts M10 (#C1).
- Page 8 ASSEMBLY INSTRUCTIONS STEP #3 Attach the leg developer (#37) between the brackets on the front of the front base with one bolt M10X75 (#A3), two washers 10 (#B1) and a nylon M10(#C1) nut. Push a roller tube (#34) through the upper and lower holes in the leg developer and through the tube welded to the back of the front base.
- Page 9 ST-2600 EXPLODED VIEW...
- Page 10 STRENGTH TRAINER 2600 PARTS LIST Part# Description Left Safety Hook Crutch Rect. Out Plug 50x70mm Knob bolt M12x80 Left Upright Round Inner Plug Weight Storage Rectangular Plate Sq. Inner Plug 50x70mm Cross Bar Right Upright Backrest Adj Bar Small Rubber Plug Backrest Tube Long Lock Pin Backrest Fixed Bar...
-
Page 11: Warranty
Arm Curl post Rect. Outer Plug 50m Keys Fitness Products LP warrants this product for a period of 1 year on the Frame, 1 year on Parts and 90 days on the Upholstery from the original date of purchase. the product from defects in materials and workmanship for the original purchaser.