2-1. Rear Cover Removal
=>
=>
=>
Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set.
2-3. Chassis Removal and Refitting
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2 DISASSEMBLY
=>
2-2. Speaker Box Removal
To remove the speaker box assembly remove the two screws
circled and unplug the speaker lead from connector CN2500
on the 'A' board. The assembly can then be lifted gently
away from its supporting arms.
When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
- 13 -
Screws