Exterior Lamps Off; Reminder; Headlamp Main/Dipped-Beam; Flash-To-Pass - Cadillac 2014 Escalade ESV Owner's Manual

6-2 Lighting
When the headlamps are turned on
while the vehicle is on, the
headlamps will turn off automatically
10 minutes after the ignition is
turned off. When the headlamps are
turned on while the vehicle is off,
the headlamps will stay on for
10 minutes before automatically
turning off to prevent the battery
from being drained. Turn the
exterior lamp control to off and then
back to the on position to make the
headlamps stay on for an additional
10 minutes.

Exterior Lamps Off

Reminder

If a door is open, a reminder chime
sounds when the headlamps or
parking lamps are manually turned
on and the key is out of the ignition.
To turn off the chime, turn the
exterior lamp control to off or AUTO
and then back on, or close and
re-open the door. In the AUTO
mode, the headlamps turn off once
the ignition is in LOCK/OFF or
remains on until the headlamp delay
ends (if enabled in the DIC). See
Exit Lighting under Vehicle
Personalisation on page 5-36.
Headlamp Main/
Dipped-Beam Changer
(Headlamp Main/Dipped
Beam Changer): To change the
headlamps from dipped to main
beam, push the indicator lever
toward the instrument panel. To
return to dipped beam headlamps,
pull the lever toward you. Then
release it.
When the main beams are on, this
indicator light on the instrument
cluster will also be on.

Flash-to-Pass

This feature lets you use the
main-beam headlamps to signal a
driver in front of you that you want
to pass. It works even if the
headlamps are in the automatic
position.
To use it, pull the indicator stalk
toward you, then release it.
If the headlamps are in the
automatic position or on dipped
beam, the main-beam headlamps
will turn on. They will stay on as
long as you hold the stalk toward
you. The main-beam indicator on
the instrument cluster will come on.
Release the stalk to return to normal
operation.
The dipped-beam headlamps must
be on for the flash-to-pass feature
to work.