Static Ip Address For Wan - D-Link DSL-504T Manual

DSL-504T User's Manual

Static IP Address for WAN

When the router is configured to use static IP address assignment for the WAN
connection, you must manually assign a global IP address, subnet mask and gateway
IP address used for the WAN connection. Most users will also configure DNS server IP
settings in the DNS settings configuration menu (see below). Please see the following
page for an explanation of the fields on this page.
ATM VC Setting-
ATM VC Setting-
VPI & VCI:
D-Link Systems, Inc.
Do not change the PVC (Pvc0) index for the initial connection.
PVC:
Do not change the VPI or VCI value unless you have been told to do
so. These numbers are used to define a unique path for your
connection. If you have been given specific settings for this to
configure, type in the correct values assigned by your ISP.
Configuring the WAN Connection
49