D-Link DSL-504T Manual page 21

DSL-504T User's Manual
Hub or Switch to Router Connection
Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a
straight-through cable as shown in the diagram below:
Computer to Router Connection
D-Link Systems, Inc.
Wired Network Connections
If you wish to reserve the uplink port on
the switch or hub for another device,
connect to any on the other MDI-X ports
(1x, 2x, etc.) with a crossed cable.
You can connect the Router directly to
a 10/100BASE-TX Ethernet adapter
card (NIC) installed on a PC using the
Ethernet cable provided as shown in
this diagram.
21