D-Link DSL-504T Manual page 68

DSL-504T User's Manual
Advanced - RIP
The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3
routing devices on your local network or remote LAN.
To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1,
RIPv2 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply.
The RIPv1 Compatible option will respond to or send RIP requests compatible with
both RIP v1 and RIP v2.
The direction configuration refers to the RIP request. Select In to allow RIP requests
from other devices. Select Out to instruct the Router to make RIP requests for routing
tables from other devices. Select Both to share routing tables in both directions.
D-Link Systems, Inc.
Advanced - RIP
68