Create Policies - PaloAlto Networks VM-100 Deployment Manual

Deploy the VM-Series NSX Edition Firewall
Deploy the Palo Alto Networks NGFW Service
10. Access the Panorama web interface to make sure that the VM-Series firewalls are connected and synchronized with
Panorama.
a. Select
Panorama > Managed Devices
b. Click , and select Commit Type as
Commit
Note A periodic Panorama commit is required to ensure that Panorama saves the device serial numbers to
configuration. If you reboot Panorama without committing the changes, the managed devices will not
connect back to Panorama; although the Device Group will display the list of devices, the devices will not
display in
Panorama > Managed Devices
11. Verify that the capacity license is applied and apply any additional licenses that you have purchased. At a minimum,
you must activate the support license on each firewall.
a. Select
Panorama > Device Deployment > Licenses
b. To apply additional licenses on the VM-Series firewalls:
1. Click
Activate
2. Find or filter for the firewall, and in the
activate. Only one authorization code can be entered at a time, for each firewall.
3. Click , and verify that the result of the license activation was successful.
Activate

Create Policies

The following topics describe how to create policies on the NSX Manager to redirect traffic to the VM-Series
firewall and how to create policies on Panorama and apply them on the VM-Series firewall so that the VM-Series
firewall can enforce policy on the traffic that is redirected to it.
60
to verify that the firewalls are connected and synchronized.
Panorama
on
Panorama > Device Deployment > Licenses.
Auth Code
The VM-Series NSX Edition Firewall
.
.
to verify that the VM-Series capacity license is applied.
column, enter the authorization code for the license to
VM-Series Deployment Guide