INSTALLATION & OPERATION MANUAL
ENGINE MOUNTING REQUIRMENTS
• The mounts must be strong enough to carry the loads applied by the weight and power of the
engine. It also must be stiff enough that the engine does not sag or move too much when
i
It l
t b
power is applied.
• The mounts must position the engine at the correct height and angle so that the engine's
thrust line suits the boat.
ENGINE MOUNT DIMENSIONS
! !
! !
U125 Series Engines
CHAPTER 2
CHAPTER 2
ENGINE MOUNT SYSTEM
tiff
h th t th
USE ONLY THE ORIGINAL HYUNDAI SEASALL ENGINE MOUNTS THAT
USE ONLY THE ORIGINAL HYUNDAI SEASALL ENGINE MOUNTS THAT
WERE SUPPLIED WITH THE INITIAL PURCHASE.
WERE SUPPLIED WITH THE INITIAL PURCHASE.
WERE SUPPLIED WITH THE INITIAL PURCHASE
WERE SUPPLIED WITH THE INITIAL PURCHASE
AFTER INSTALLATION AND ALIGNMENT OF THE ENGINE, MAKE SURE
AFTER INSTALLATION AND ALIGNMENT OF THE ENGINE, MAKE SURE
THAT NO RESIDUAL TENSION EXISTS IN THE DRIVETRAIN.
THAT NO RESIDUAL TENSION EXISTS IN THE DRIVETRAIN.
i
d
t
CAUTION
CAUTION
-15-
t
h
h