Chapter 13 Maintenance; Predelivery Inspection Check List - Hyundai Seasall U125S Installation & Operation Manual

PREDELIVERY INSPECTION CHECK LIST

BEFORE THE WATER TEST
Seawater inlet valve open
Engine coolant level
Cooling system hose clamps tight
Engine oil level
Power steering fluid level
Drive belt tension
All electrical connections tight
EOI warning system operating EOI i t
Battery fully charged and secured
All fuel connections tight
Exhaust system hose clamps tight
Engine mount tight Engine mount tight
Engine alignment
Correct rotation propeller
(Installed and correct torque)
Engine coolant and oil drain plug
closed closed
Throttle, shift and steering system
fasteners tightened properly
-PROPULSION CHECKS
Stern drive unit oil level
Power trim oil level (stern drives)
Drive unit fasteners torque
Power trim cylinders fasteners tight
Propeller nut torque
Transmission fluid level
INSTALLATION & OPERATION MANUAL
U125 Series Engines
CHAPTER 13 CHAPTER 13
MAINTENANCE
Y
ti
ON THE WATER TEST
N
Boat drain plug in place
(check before putting boat in water)
Seawater pump operation
Seawater strainer correctly mounted , Seawater strainer correctly mounted
Clean and tightly closed
Engine alignment (propulsion only)
Fuel leaks
Oil leaks
Coolant leaks
Water leaks
Exhaust leaks
EOI and gauges operation
Engine emergency stop switch
operation
Idle RPM, within specifications
WOT RPM, within specifications
( (in forward gear) g
-PROPULSION CHECKS
Steering operation throughout range
Power trim operation (stern drives)
Shift operation Shift operation
Drive oil leaks
1.3 AFTER THE WATER TEST
Fuel, oil, coolant, water and fluid
leaks
Oil and fluid level
Propeller nut torque
- 61 -
)
Y N