Motion Detection Tab - Set The Motion/Vmf Detection; What Are Vmf Functions - Sony Ipela SNC-CH135 User Manual

opened. To clear the detection status, click Clear
button.
OK/Cancel
See "Buttons common to every menu" on page 33.
Motion detection tab — Set the
motion/VMF detection
Motion detection detects moving objects in the camera
image and outputs an alarm. In VMF, an alarm is
notified when a motion detected under the motion
detection setting passes, appears in, disappears from or
shows any movement in a specified area or on an
inspection line.
The motion detection function and the VMF function
can independently set off an alarm at the time of
detection.

What are VMF functions

VMF is a function for inspecting whether a motion
detected under the motion detection setting passed,
appeared in, disappeared from or shows any movement
in a specified area or on an inspection line.
The inspection method is selected from Pass/Presence/
Appear/Disappear/Volume, and allows for a maximum
combined inspection method of three, which can be
simultaneously or sequentially executed.
Passing
A passage line is determined, and when a moving object
passes the setting line, an alarm is set off.
FTP client alarm sending, image memory alarm
recording and/or audio file playback can be performed
in synchronization with this alarm.
Existing
When a moving object in the designated area exists after
a certain period of time has elapsed, it will set off an
alarm. FTP client alarm sending, image memory alarm
recording and/or audio file playback can be performed
in synchronization with this alarm.
Appearance
When a moving object appears in the designated area, it
will set off an alarm. FTP client alarm sending, image
memory alarm recording and/or audio file playback can
be performed in synchronization with this alarm.
Disappearance
When a moving object disappears from the designated
area, it will set off an alarm. FTP client alarm sending,
image memory alarm recording and/or audio file
94
Setting the Sensor input/Camera tampering detection/Motion detection/Audio detection — Event detection Menu
playback can be performed in synchronization with this
alarm.
Capacity
When the Capacity of moving objects in the reference
area reaches definite number, an alarm is set off. FTP
client alarm sending, image memory alarm recording
and/or audio file playback can be performed in
synchronization with this alarm.
Notes
• Before actual use, perform an operation test and
confirm that the motion detection function works
correctly.
• Even when privacy masking is used, the motion
detection function operates based on the images
before masking is processed.
• When cropping is enabled, the motion detection menu
is not displayed. To use the motion detection menu,
disable this function first.
When the Motion detection menu is
displayed for the first time
When you click Motion detection, "Security Warning"
is displayed.
When you click Yes, ActiveX control is installed and the
Motion detection menu is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the proxy server
manually. For the setting of the proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
• When you are using Windows XP Service Pack 2 or
later, Windows Vista or Windows 7, the information
bar or "Security Warning" may appear as you click
Motion detection. For details, see "Installing ActiveX
Control" in "When using Windows XP Service Pack 2
or later" on page 9, "Installing ActiveX Control" in
"When using Windows Vista" on page 11, or
"Installing ActiveX Control" in "When using
Windows 7" on page 14.