Belkin TuneCast Auto Quick Start Manual page 9

For ipod and iphone

Hide thumbs Also See for TuneCast Auto:

Using the TuneCast Auto

Using the PRO Setting to Improve Performance

When you connect your iPod or iPhone, your TuneCast Auto will automatically detect the

iPod or iPhone model and adjust the volume. Although the default volume setting will

be ideal for most conditions, you may be able to improve the audio performance of your

TuneCast Auto by using the PRO setting. The PRO setting can make your music sound

louder and fuller by decreasing the amount of attenuation in the audio signal. Professional

FM stations use dynamic compression to make music louder and fuller while limiting

distortion. You can use the three PRO settings on your TuneCast Auto to add dynamic

compression to your audio:

Normal - No change to the audio. This setting works well with all types of audio.

PRO 1 - Increases the average volume of the audio. This setting works well with most types

of music.

PRO 2 - Increases the average volume even further. This setting works well with quieter

music, but it may cause distortion with louder music.

pr~

Increases the average volume and transmits in mono (instead of stereo). This

setting works well for podcasts and audio books. It can also be used to improve reception if

you are not receiving a clear signal from your TuneCast Auto.

When you press the "PRO" button, your TuneCast Auto will display the current PRO setting.

Pressing the "PRO" button again will change the setting to PR01, PR02, and

pro,-

as follows:

NORMAL-...... pr01 - -.... pro 2

---+.

prat-

Using the TuneCast Auto