Belkin TuneCast Auto Quick Start Manual page 8

Selecting an FM Frequency
Manually Selecting an FM Frequency
If you want to use a specific frequency, you can manually select it on your TuneCast Auto.
1.
Tune your stereo to a frequency between stations. The ideal frequency is one not
broadcasting a radio station's signal.
2. Press the + or - button on your TuneCast Auto to select the same frequency.
3. To indentify the best available frequencies in your area, visit www.belkin.com/mybestfm.
Storing and Selecting a Frequency
You can store two frequencies using the "m1" and "m2" buttons.
1.
To store a frequency, select the desired frequency on your TuneCast Auto using
the + or - buttons. Press and hold the "m1" or "m2" preset button for two seconds.
The "m1" or "m2" icon will flash on the screen when the frequency is set.
2. To recall a preset frequency, press the "m1" or "m2" preset button.
Your TuneCast Auto will change to the preset frequency.
Selecting an
FM
Frequency
I
03