Belkin TuneCast Auto Quick Start Manual page 6

Introduction
Your TuneCast Auto is designed to power, charge, and transmit audio from your iPod or
iPhone to your car stereo. Please review this User Manual carefully so that you can get the
most from your TuneCast Auto, virtually anywhere you go.
Connecting Your TuneCast Auto
1.
Turn down your stereo's volume.
2. Connect your TuneCast Auto to the
cigarette lighter or power outlet in your vehicle.
3. Connect your iPod or iPhone
to your TuneCast Auto.
Note: Your TuneCast Auto will automatically turn off if there is no audio for approximately
60 seconds for European versions, but it will automatically turn on again when it detects
audio from your iPod or iPhone. You can also press the "m1" or "m2" button to turn on your
TuneCast Auto.
Introduction
I
01