Table of Contents
Advertisement
S
PECIFICATIONS
MODEL ----------------------------------------------------- HCA-260
Length ------------------------------------------------------- 2235 mm (88.0 in.)
Width -------------------------------------------------------- 250 mm (9.84 in.)
Height ------------------------------------------------------- 250 mm (9.84 in.)
Weight (dry) * ---------------------------------------------- 6.35 kg (14.0 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke -------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement ----------------------------------------------- 25.4 cc (1.55 cu. in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler w/Catalyst
Carburetor -------------------------------------------------- Walbro Model w/purge
Ignition System -------------------------------------------- Flywheel Magneto, CDI (capacitor discharge ignition)
Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be
Oil ------------------------------------------------------------ Power Blend
Fuel Tank Capacity ---------------------------------------- 0.58 lit. (19.6 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 4.072 : 1
Cutter -------------------------------------------------------- Double Reciprocating Blade - Double Edge
Effective Length ----------------------------------------- 464 mm (18.5 in.)
Pitch ------------------------------------------------------- 35 mm (1.38 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------ 13 mm (1/2 in.)
Cutting Angle Adjustment ------------------------------- -30 ~ 180 Degrees in 15 degree increments
Idle Speed --------------------------------------------------- 2,750 - 3,250 RPM
Clutch Engagement Speed -------------------------------- 3,600 - 4,200 RPM
Wide Open Throttle Speed ------------------------------- 10,000 - 11,000 RPM
S
HAFT
O
good quality. Gasoline may contain up to 10% Ethanol (grain
alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline
containing methanol (wood alcohol) is NOT approved.
TM
Premium Universal 2-Stroke Oil
H
C
EDGE
LIPPER
'
M
PERATOR
S
ANUAL
27
Advertisement
Table of Contents
