Table of Contents
Advertisement
3 Keep on pressing and holding the Paging/Register button for 40 seconds.
4 Release the Paging/Register button.
5 Unplug the micro-USB plug of the power adapter from the base for a few
seconds, and then plug it back in again.
6 The notification bar on any previously registered handsets should show NA
instead of the handset number, indicating successful de-registration from the
base.
10.3 Reset the Handset
From the Home screen, Tap
•
The Handset Reset starts.
•
If successful, ""Handset resetting done!" is displayed.
11 USING THE PHONE FUNCTIONS
11.1 Make an External Call
Placing an external call using the Smart 64 Android Smart Home Phone handset is
similar to dialling with a mobile phone.
1. From the Home screen tap
2. Enter the phone number.
3. Tap
to dial the number.
4. Tap
to end the call.
Tip
If you enter a wrong number, Tap
11.1.2 In-call Options
During a call, you can access the following options:
Dial pad
Shows the dialer pad for Touch tone dial and Recall (R) function.
End
Ends the current call.
Mute
Mutes the handset microphone.
Speaker
Switches between earpiece and speakerphone modes.
DECT Settings / Using the Phone Functions
> DECT manager > Handset Reset > OK.
to access the phone tab and dial pad.
to delete the digits one by one.
24
Advertisement
Table of Contents
