Table of Contents
Advertisement
2.5.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically detected by
the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an
item then press <Enter> to display the configuration options.
Q-Fan Function [Disabled]
Allows you to enable or disable the Q-Fan function.
Configuration options: [Disabled] [Enabled]
The following item becomes user-configurable when the Q-Fan Function item is set to
[Enabled].
CPU Fan Profile [Performance Mode]
Allows you to adjust the CPU target temperature.
Configuration options: [Optimal] [Silent Mode] [Performance Mode]
CPU/MB Temperature
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. These items are not user-configurable.
CPU/Chassis/Power Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU, and Chassis fan
speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard,
the field shows 0. These items are not user-configurable.
Vcore, Vcc 12, Vcc 3.3V, 5V [xxxV]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Configuration options: [xxx] [Ignored]
CPU Fan Speed warning [600 RPM]
Sets the CPU fan speed warning feature. Configuration options: [Disabled] [600RPM]
[1200RPM] [1600RPM]
ASUS P5N73-AM
2-19
Advertisement
Table of Contents
